Repairing wallpaper that is damaged is usually met with disdain. In fact, most of the time when I see clients that have torn, bubbling, or detached wallpaper, they tell me, “Oh, yeah, we’re going to replace that…” I always ask them why, and then tell them they can save themselves the trouble by just repairing it.
Most wallpaper problems, and especially the ones we’ll talk about in this article, can be fixed with three easy steps, and you typically only need about four different tools to do all of the repairs.
Here are the tools:
– Utility knife
– White glue or border adhesive
– Damp sponge
So let’s get to it.
If you have a lot of bubbles in your wallpaper, yes, you should probably just get it replaced. Lots of bubbles – even a few bubbles – are usually caused by poor initial installation. But, more often than not, there are probably just a few bubbles, and those are pretty easy to take care of. Here are the steps to repair a bubble in your wallpaper:
1) Using you utility knife, perform a cross cut to open the bubble (a cross cut is one vertical cut and one horizontal cut that intersect in the middle).
2) Open the four leaves you are left with and apply a small amount of white glue with a small brush.
3) Using a damp sponge, smooth the leaves back into place. Allow to dry completely.
That’s it. That’s all you need to do to repair those annoying bubbles in your wallpaper.
Torn wallpaper can happen for any number of reasons. Usually they are not because of poor application on the initial installation, but it could be. If you have seams that are overexposed, it makes them easier to tug on, which results in tears.
1) Carefully pull back the torn section of wallpaper.
2) Apply white glue or border adhesive to wall with small brush, taking care not to get glue on front end of any of the wallpaper.
3) Smooth the torn wallpaper back into place using a damp sponge.
You’re probably getting the drift now, eh? Wallpaper doesn’t have to be a nightmare.
Wallpaper that is coming off of the wall is usually caused by poor initial application, but it can also be caused by moist air in bathrooms, which is where you are most likely to find this particular problem. To prevent this problem in the future, check your bath fans to make sure they are in working order and replace if need be.
1) Peel back lifted section and apply white glue or border adhesive.
2) Use a damp sponge to smooth section back into place.
3) After the area is done drying, apply caulk along the seam between the wallpaper and the wall.
The majority of wallpaper issues are fairly simple to fix, as you can see. There’s no need to switch out your wallpaper for small, but common, problems like the ones noted in this article. So don’t be afraid of your wallpaper – make your wallpaper fear you.
About the Author
Diane Kuehl is a home improvement/DIY professional and owner of DIY Mother. She lives in Springfield, Illinois with her husband and two kids.
We continually try to bring our readers ideas for remodeling. California is one of the areas we serve the most. So here are more ideas for California homeowners:
Many homeowners have already made the decision to remodel their kitchen, bedrooms and living areas with contemporary designs, and now contemporary design is trending into bathrooms in homes across the California area. Contemporary design features a clean, fresh look with a distinct, minimalistic feel to the space. when implemented properly, contemporary design can create a look of modern luxury in your space. Stark, uncomplicated lines coupled with minimal use of color and ample use of materials with sheen like marble, glass and are often hallmarks of contemporary design. There are several key ideas you can consider implementing in your space to create a contemporary look.
Many of the hottest contemporary designs in California bathrooms today feature elevated vanities. While traditional bathroom vanities lay flush with the floor, the latest trends in bathroom vanities place them elevated approximately six to twelve inches above the floor. This creates an open, airy feel to the space. These vanities most typically will feature crisp, straight lines and will lack ornate detail. They may, however, feature contemporary hardware and an upgraded sink to add décor while still maintaining a light, fresh look. The material of vanities may commonly be darkly stained, natural wood or lacquered wood with a white, gray or black hue.
The hottest colors to use in contemporary bathroom designs today are black, white and gray. To create a lofty, airy feel in the space, ample use of white is often used coupled with minimal use of black or gray as an accent color. However, some contemporary bathroom designs make use of bolder hues minimally to add flair and focus to the space. Hot accent colors include warm hues like shades of red or orange. These hues may be used sparingly such as by only placing them in a single decorative piece of artwork or in a bathroom mat. White or light gray are most commonly used on flooring and walls to give the space an open look.
Fresh, Natural Lighting
The look of a contemporary bathroom could not be completed without installing the right lighting in the space. Your basic yellow-hued lighting from incandescent light bulbs typically will not help you to achieve the desired look in this space. A contemporary bathroom has bright, natural lighting sourced from designer light fixtures. These features typically carry stark, sleek lines. They may have a muted, metallic look that complements other features in the bathroom, or they may have a black or white finish. The light bulbs used generally will create the look of natural sunlight. The use of authentic natural sunlight streaming in through windows may be ideal during daylight hours.
Remodeling your own bathroom with a contemporary style may help you to create a space that is both modern and luxurious. There are many different contemporary designs that can be implemented in a space. These contemporary design ideas can help you to get started with your own home remodeling efforts, but you may also consider browsing through images of completed bathroom projects with a contemporary design.
Want More?? – Get California Bathroom Remodeling Ideas and Estimates Here: http://www.bizzibid.com/california/bathroom/
The trend in modern housing in Washington State is to make the bathroom a destination for relaxation as well as the necessities. Modern bathroom fixtures and additional components of sauna and hot tub add value to the dwelling if put on the market for sale. To achieve relaxation, a bathroom needs a fresh look and feel inspired by the calming of natural décor, colors and shapes, windows and solar tunnels plus fixtures that provide reliable and comforting service.
Three Modern Bathroom Remodeling Ideas
Bathtub of the Future
When remodeling a bathroom, incorporate ideas that better reflect the owner’s situation and possible future needs. A bathtub with whirlpool capabilities is an excellent addition for warm and pulsating waters to enhance relaxation. Bathtubs with whirlpool come in corner, oval, rectangle and walk-in styles. Custom colors as well as traditional white match or augment nearly every possible theme or color scheme. The ease of entry without climbing over a tub side, plus a built in seat, makes a walk-in tub an excellent choice for the infirmed as well as athletic type experiencing a rough patch in their performance level. A walk-in tub gives the bather a soaking bath plus the experience of a Jacuzzi spa, seated in comfort and surrounded with warm pulsating waters.
Not a Basic White Toilet
Toilets are boring, and the most boring one of all is the basic white toilet. Consider a change to a bidet or washlet for a change. Bidets are basically a boring toilet, but with an invigorating and hygienic twist. Bidets include features which were rarely used in the United States until just recently. The features of a bidet include anus washing, bidet washing, seat warming and deodorization, plus automatic lid open and closure, hence its descriptive summarized name – warm water cleaning toilet seat. Modern bidets are high-tech with a wireless remote control panel to control the temperature of the seat, massage options, water jet and temperature settings, blow dryer, automatic flushing and automatic lid opening and closing. The control panel is mounted on the toilet or on a nearby wall for ease of control. Some remote controls may be set with room temperature controls, too. A washlet may be sat on facing the tank or away from the tank, or both ways for a total cleansing.
Another option is the installation of a urinal, too. The urinal and bidet may be set side by side to take advantage of available space.
One Size Fits All Shower
Household occupants come in all shapes and sizes. A “One Size Fits All Shower” has no ledges or rims, a central drain and a single shower head mounted on the ceiling or an array of not so conventional shower heads at various levels. This type of shower configuration can accommodate someone in a wheelchair or other mobility device with no ledges to overcome. A shower chair or stool will easily fit in its confines, too. Its location would be ideal in a mud room or close to the entry from outdoor activities. Parental unit and child(ren) can easily rinsing off sand, salt and the rest of the day’s residue after a day in the sun. In Washington State, this shower configuration is great for removing snow and ice from outdoor clothing and then showering the person in charge of snow removal. After a soak in the hot tub in the backyard, a quick shower gets you ready for the next event.
The basic concept of this type of shower is its no borders concept. This can be achieved with the use of an extended, oversized shower curtain or with Plexiglas held in place with waterproof sealants. The current bathtub or shower drain may be modified for best drainage along with the use of sloping floors with waterproofing.
For bathroom remodeling ideas in Washington State, go here: http://www.bizzibid.com/washington/bathroom/
Contemporary bathrooms usually incorporate four plumbing fixtures: Shower, toilet, bathtub, and a sink. Most of the homes in Arizona however feature the common traditional styles such as white or peach colored walls. The homes are not ugly, but adding a creative touch to these simple bathroom designs would produce marvelous results. For a contemporary design in bathrooms, the homeowners should consider a total transformation in the color scheme, built-in planter, fixtures, flooring, as well as the cabinetry. Designers play around with a mix and match of material within the room when remodeling, to create a desired effect in the room. Some homeowners like their bathrooms glamorous, relaxing, or spontaneous while others prefer having a simple and peaceful environment. Remodeling a home requires creativity and precision because more often than not, the clients would prefer to have their plumbing fixtures in the same positions.
Lighting plays a major role in the general appearance of a bathroom. Maximum natural lighting during the day gives life to bathrooms. Replacing the traditional confining walls in most Arizona home, which partition the toilet from the bathing area, with full-height translucent glass dividers increases the lighting and makes the room appear captivating. Trading the small quatrefoil windows with full-height glass windows creates a clear view of the outdoors and allows maximum penetration of sunlight during the day. An outside view eliminates boredom in bathrooms. Replacing all the colored window glasses or milk-Plexiglas with clear glass would increase the general quality of natural light. These glass dividers and full-height windows also create space by making the bathroom appear larger than it actually is.
As for the artificial lighting, which is mainly useful during the night, incorporating classic styles would create marvelous results. Ample lighting should be place on strategic points such as near the mirrors, showers, or bathtubs. A good example is fixing LED lighting around a lengthy mirror for a halo effect. Featuring stylish lampshades with bold colors would create an elegant appeal.
Incorporating color schemes in bathrooms has a dramatic effect. Colors can be featured on walls, fabric and by adding decorative colored items. Warm colors like orange and red have an energetic effect. Cool colors like blue and green are soothing and calming. The homeowner should choose the best colors for the bathroom depending on the desired effect, whether energizing or relaxing. Red has a wow effect on bathrooms while black and white color schemes used in the appropriate proportions are an adventurous break through from the traditional designs. The crazy color scheme is the most dramatic color scheme. This color scheme is always vibrant and can never appear monotonous.
Grey ceramic tiles are simple but remain the best for bathroom flooring. The other option would be using the same color of tiles as the ones used on the walls. Textured ceramic floor tiles are perfect because they reduce the risk of sliding on the floors. Granite tiles are unique for their attractive finish therefore would greatly enhance the appearance of the bathroom. Mosaic tiles on walls that rhyme with the bathroom’s overall color scheme are the best choice for a spontaneous and stunning look.
Dark finely polished as well as trendy cabinetry and bathroom furniture blend well in all kinds of bathroom designs in Arizona homes. Together silver coated bathroom fittings and accessories; the bathroom acquires the element of a classic touch. Trendy bold colored vanity sets and built in planters would most definitely look amazing.
To add a final touch to the contemporary bathroom, green plants can be planted on built-in planters located near the bathtub. Other different flower types with various colors should be placed in vases at various positions within the bathroom. Paying attention to every small detail such as flower arrangement and unique accessory choices would make the bathroom a modern luxury area. With such beautiful and creative designs, event the guests would want to visit the bathroom whenever there is a chance.
For more Arizona bathroom remodeling advice and ideas, visit: http://www.bizzibid.com/arizona/bathroom/
Massachusetts has been a busy spot for home remodeling requests so far this spring, which may be a good sign that the economy is rebounding in the New England area. A good residential remodeling contractor can breathe new life into your home. Most can handle a wide variety of renovations that include anything from refreshing an aging kitchen or bath to adding and constructing a new room. As is the case with most home improvement and repair projects, a small amount of due diligence can eliminate misunderstandings and make sure you get what you want. The following six points are vital considerations before making your choice:
Experience Suited to Your Massachusetts Project
Whenever you are constructing a separate addition or remodel to your residence, make certain your Massachusetts contractor possesses the proper background and has completed comparable assignments previously. As much as this seems common sense, always make sure hire you don’t hire a flooring contractor to perform your entire renovation job. Their measure of experience is going to be restricted to ensuring your tile or wood floors are done correctly – not necessarily other kinds of construction.
However, a suitable home remodeling contractor will likely be a person who has practical experience supervising virtually all stages of construction from the basic foundation, to roofing, and interior finishing. If you are only seeking to have your home painted, a painting professional will likely be acceptable to complete this sort of work on your house.
List of Materials
Any sort of estimate you get from a licensed contractor needs to include a reasonably comprehensive list of materials, yet it will obviously be determined by the extent and difficulty of the project. The listing supplied by an individual adding a counter top in your kitchen will be significantly different that one a contractor putting in an additional room in your home would provide. In either situation, it is best to make certain you get a written summary of the supplies being used in your project.
Verify Massachusetts Insurance
This is a huge consideration and it must be asked early in the process and verified. Make sure you request proof of liability insurance coverage and worker’s compensation protection from the prospective contractor. The obligation to have liability coverage must be considered an unconditional requirement for every service provider, which means you will want to avoid anyone undertaking work on your residence without this. For most contractors, worker’s compensation insurance is required.
Always Get Local References
Any reputable contractor that does good work and has a favorable background should be able to present you with references from recent happy customers. Phone or e-mail these people to ask how their experience was, and if they would endorse the contractor.
MA State License
Depending on the type of work being performed, virtually all contractors must have some kind of state or county license(s). Obtain the telephone number and get in touch with the proper state or county board for proof of licensure and to ensure it is current. Many people advertise themselves as registered, yet not everyone has current credentials. If the contractor will not supply you with their licenses, it is a good idea to avoid doing business with them.
Deposits & Down Payments
Based on the extent of your project, the contractor may request a down payment before carrying out the work. Use caution so as not to pay an excessive amount upfront before any work is performed. 10% is generally sufficient to show your commitment to getting the work done. The outstanding balance should be disbursed during the remainder of the undertaking. This can be usually be determined by how big the project is and the costs involved. In the event the contractor needs to make large investments in supplies for your assignment, anticipate making staggered payments as the project progresses.